Hubs
|
|
|
|
|
|
Campagnolo Record
|
Top of the line track hub .Single fixed.Track lockring included.Track wheels can be professionally handbuilt with this hubs in the shop.
|
440.00 $
|
In stock
|
|
|
|
|
|
Chub hub
|
rear only
|
225.00 $
|
In stock
|
|
|
|
|
|
Dura Ace
|
Shimano, Dura Ace, HB-7600, Front and rear . Track, 32H,
front hub spacing(overlocknut)is 100mm.;rear spacing is 120mm.Large Flange.Hubs can be sold individualy;please inquire about the price.
Track wheels can be professionally handbuilt with this hubs in the shop.
|
230.00 $
|
In stock
|
|
|
|
|
|
ENO eccentric fixed gear
|
This is a fixed gear hub that could be used with vertical drop outs without needing a chain tensioner. The hub houses two sealed cartridge bearings, an aluminum axle, and stainless steel axle ends. The key is the location of the fixing bolts located in the axle ends. The bolts are offset 7.5mm from the center of the axle. Normally the fixing bolts are centered to the axle. Once in the frame the axle ends can rotate 180 degrees which gives 15mm of travel. Therefore, by rotating the axle ends you can attain proper chain tension. The eccentric ENO is a flip flop design allowing the rider to use a White Industries specific fixed gear on one side and a standard english threaded freewheel on the other. 32 hole/126mm spaced hubs are usualy in stock.The hub can be ordered in 32h or 36h for frame spacings of 126mm, 130mm or 135mm.
|
135.00 $
|
In stock
|
|
|
|
|
Miche Primato
fixed gear
|
Fixed gear on one side ;frewheel on the other side.Track wheels can be professionally handbuilt with this hubs in the shop.
|
135.00 $
|
In stock
|
|
|
|
|
|
Paul Components Polished silver
|
$140-front;$150-rear.Polished silver .Single fixed.Track lockring is included.Track wheels can be professionally handbuilt with this hubs in the shop.
|
290.00 $
|
In stock
|
|
|
|
|
|
Paul Components
|
$130 -front;$140 -Rear hub.Anodized black.Flip flop.fixed on one side,freewheel 0n te other side.Track lockring is included.
Track wheels can be professionally handbuilt with this hubs in the shop.
|
270.00 $
|
In stock
|
|
|
|
|
|
Phill Wood
|
 
 
These are classic-high flange hubs made by Phil Wood.32 holes front and rear hub.100mm front spacing and 120mm rear.These hubs feature a stainless steel bolt-on axle design made for allen key removal. These hubs feature percision sealed bearings and hardware. They are fixed to fit a regular(shimano,phill,campy,etc.) cog with a 1.370" x 24 T.P.I. and are supplied with a stainless steel lockring that is 33.5mm x 24TPI that is Campagnolo compatible. made in USA.
the prices are :
-front polished silver-$140;
-rear polished silver -$160;
-front black-$155;
-rear black-175;
-front (any other color made)-190;
-rear any other color-200
please call to make sure the color you want is available- this site is not updated daily.Track wheels can be professionally handbuilt with this hubs in the shop.
|
200.00 $
|
In stock
|
|
|
|
|
|
Stermey Archer
|
StermeyArcher 3speed/coaster brake hub .model name is AWC.made in England in 1995 - all stamped on the hub. it is brand new- NewOldStock.
hub's body is made of steel.
hub's overlocknut with(rear spacing)is 118mm.
it is 36 hole drilling pattern.wheels can be professionally handbuilt with this hubs in the shop.
|
50.00 $
|
In stock
|
|
|
|
|
|
Return to products list
|
